4
Installation
1
Installing the faucet assembly
CAUTION:
Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□
Place the faucet (A) through the mounting
holes in the sink.
□
Secure the faucet (A) to the sink using the
washers (G) and lock nut (H) provided.
2
Installing the faucet handles
□
Remove the preassembled nuts (E) and washers
(D) from the hot and cold faucet handles (B and C).
□
Insert the hot faucet handle (B) to the left of the
spout and cold faucet handle (C) to the right of
the spout.
NOTE:
The hot water valve is identified with a label.
□
Shut off the water supply. Remove the old
faucet.
□
Clean the mounting surface.
□
Loosen the screws (F) on the nuts (E) until the
ends of the screws (F) are flush with the face of
the nuts (E).
□
Attach the faucet handles (B and C) underneath
the sink using the washers (D) and nuts (E).
Securely tighten the screws (F) on the nuts (E).
□
Remove the preassembled lock nut (H) and
washers (G) from the new faucet (A).
1
1
F
E
1
A
2
A
G
H
H
3
2
2
B
C
F
4
E
5
E
D
F
3
E
D
F
3
