15
Installation (continued)
3
Preparing the pop-up drain
□
Remove the old pop-up drain and clear up the
hole in preparation for the new pop-up drain
installation.
□
Unscrew the nut (J) from the pop-up body (E),
move over the tail pipe (K) and washer (I), then
unscrew the coupling nut (H) and remove the
washer (G).
4
Installing the pop-up body
□
Place the washer (F) underneath the flange of
the pop-up body (E). Slide the pop-up body (E)
down through the drain hole on the vessel or
basin.
□
From underside, slide the washer (G) against
the bottom of the vessel or basin, thread on
the coupling nut (H) and tighten. Do not over
tighten.
5
Installing the tail pipe
□
Slide the nut (J) over the tail pipe (K).
□
Place the washer (I) into the nut and
tighten. Do not overtighten.
E
G
J
K
H
I
E
G
H
F
J
K
I
