Pegasus 22-15-2094 Скачать руководство пользователя страница 133

MY22P01 - 22_1.0_22.08.2021

132

Cleaning and servicing

7.3.4

Frame, fork, pannier rack, guards 
and kickstand  

1

Soak the components with dish-washing 
detergent if the dirt is thick and ingrained. 

2

After leaving it to soak for a short time, remove 
the dirt and mud with a sponge, brush and 
toothbrushes. 

3

Rinse off the components with water from a 
watering can. 

4

Wipe away oil stains with a degreaser.

7.3.5

Stem  

1

Clean stem with a cloth and soapy water.

2

Rinse off component with water from a 
watering can. 

7.3.6

Handlebars  

1

Clean handlebars, including handles and all 
gears or twist grips, with a cloth and soapy 
water.

2

Rinse off component with water from a 
watering can.

7.3.7

Handles  

1

Clean handles with sponge, water and soapy 
water.

2

Rinse off component with water from a 
watering can.

3

Care for rubber handles after cleaning (see 

Section 7.4.8

). 

7.3.7.1 Leather handles  

Leather is a natural product and has similar 
properties to human skin. Regular cleaning and 
care help to prevent leather dehydrating, fading or 
becoming brittle or stained.

1

Remove dirt with a soft, damp cloth.

2

Remove stubborn stains with a leather cleaner.

3

Care for leather handles after cleaning (see 

Section 7.4.8.2

).

7.3.8

Seat post  

1

Clean seat post with a cloth and soapy water.

2

Rinse off component with water from a 
watering can.

3

Wipe away any grease or assembly paste 
residue with a cloth and degreaser.

7.3.9

Saddle  

1

Clean the saddle with lukewarm water and a 
cloth dampened with soapy water.

2

Rinse off component with water from a 
watering can.

Содержание 22-15-2094

































































































































































































































Отзывы: