Peg-Perego Viaggio Shuttle 120, Инструкция по эксплуатации

Страница: 18 / 68

18
Installing the booster seat in the vehicle
2. Attach the connectors
to the vehicle seat
anchors, ensuring they
“click” into place.
1. To expose the
connectors located inside
the base, pull the handle
(fig_a) that is found in the
cover opening (fig_b).
The connectors will be
ejected (fig_c). Repeat
to make sure they have
been ejected fully and
simultaneously.
click
Installing the booster seat in the vehicle
4. After attaching the seat,
pull the front handle again
(fig_a) and, at the same
time, push the car seat
towards the vehicle’s seat
(fig_b), then release the
handle.
By doing this the release
buttons on the side of the
base will disappear thus
preventing inadvertent
release.
3. IMPORTANT:
The vehicle anchors
and the booster seat
connectors are correctly
coupled when a green
signal appears above the
connectors (fig_a). A red
signal indicates that the
attachments have NOT
been coupled correctly
(fig_b).