Peg-Perego Viaggio 0+1 Switchable, Инструкция по эксплуатации

Страница: 28 / 116

28
35• Slip the strap out through the opening in the soft cover
and remove the soft cover, as shown in the figure.
Soft cover maintenance
Brush the fabric parts to remove dust.
• Before placing the soft cover in the washing machine,
slide the foam rubber cushion out of the booster seat
from the rear.
• Machine wash at a maximum of 30°C with a delicate
wash setting and short spin cycle.
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
• Do not remove stains with solvents.
• Do not tumble dry.
30
°
How to replace the soft cover of the
“Viaggio 0+1 Switchable” car seat
To replace the soft cover of the “Viaggio 0+1
Switchable” car seat:
36• From below, slip the straps back in through the
opening in the fabric (Fig. A).
• Reinsert the crotch strap into the soft cover (Fig. B).
37• Fasten the crotch strap back onto the body.
38• Fasten the tongue to the crotch strap opening.
39• Put the soft cover in place, starting at the seat and moving
upwards, paying attention to the sides of the backrest.
40• Slip the soft cover over the headrest, ensuring the red
tongue passes through the opening in the fabric.
41• Insert the straps through the soft cover, starting with
the buckles.
42• Lengthen the straps and insert them through the body
of the car seat (the straps in the upper hole and the
buckles in the lower one).
43• Fasten them correctly on the rear, as shown in the figure.
• Fasten the harness at the front (point 17).
IMPORTANT: The straps must not be twisted.
44•
ATTENTION: The central adjustment strap must pass
between the body and the plastic shield, as shown.
45• Open the rear panel and fasten the straps onto the rear
latch plate.
• Fasten the straps from the front (point 16).
• For infants and for use in Group 0+ mode, reposition
the booster cushion.
Serial numbers
46• The following information can be found under the
seat of the “Viaggio 0+1 Switchable”: product name,
production date and serial number.
47• The type approval label can be found behind the
backrest of the “Viaggio 0+1 Switchable”.
48• Harness production date.
In the event of problems with the product, these
details will be of use to customers.
Product cleaning
• This product requires minimal maintenance. Cleaning
and maintenance must only be carried out by adults.
• It is advisable to keep all the moving parts clean.
• Clean the plastic parts periodically with a damp cloth.
Do not use solvents or similar substances.
• Brush the fabric parts to remove dust.
• Do not clean the polystyrene shock absorbing device
with solvents or other similar products.
• Protect the product from atmospheric agents:
humidity, rain or snow. Extended exposure to sunshine
can cause colour changes in many materials.
• Store the product in a dry environment.
How to read the type approval label
• This paragraph explains how to interpret the type
approval label (orange label).
• This car seat is type approved for one type of
installation in vehicles:
attachment system with
static or inertia-reel three-point seatbelts (the term
UNIVERSAL indicates compatibility of the car seat with
vehicles fitted with this type of seatbelt).
• The top of the label displays the trademark of the
manufacturing company and the name of the product.
• The letter E in a circle indicates the European type
approval mark and the number indicates the country
that issued the type approval (1: Germany, 2: France, 3: