Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-729-0307 or 708-865-8870.
7 of 9
ISSUED:09-07-07 SHEET #: 202-9199-1
Attach tilt bracket (
B
) to adapter bracket (
K
) using four M10 x 15 mm penta-pin screws (
G
) as shown below.
4
Set a cloth on the floor to prevent scratching the screen. Place the screen on the floor face down. If the screen has
knobs on the back, remove them. Place adapter bracket (
K
) on the center of the screen. Slide the vertical brackets
(
L
) along the c-channels of the adapter bracket (
K
) until the slots on the back of the vertical brackets (
L
) are aligned
to the holes on the back of the screen. Fasten vertical brackets (
L
) to c-channels using four10-32 x 3/8" socket pin
serrated screw head (
M
).
Note:
Do not fully tighten the screws (
M
) to allow the adapter bracket to slide along the vertical brackets (
L
) freely.
5
L
L
M
c-channel
K
Installing Adapter Plate to Screen
G
B
K
PORTRAIT
G
B
K
LANDSCAPE