manualshive.com logo in svg

PEERLESS OneMount ONE-TP, Инструкция по установке и сборке

Поделиться
Скачать
PEERLESS OneMount ONE-TP Скачать руководство пользователя страница 11

11 of 33

ISSUED: 09-20-06  SHEET #: 202-9167-3 01-26-07

Mounting and Removing Flat Panel Screen

Adjust tension knobs shown in detail 2 to desired
tension, balancing your screen size and weight. The
tension knob, without changing the bracket tension,
can be pulled out, away from the bracket and turned
independently of the knob post for readjustment as
shown in Detail 3.

Push or pull from top or bottom of screen to adjust
tilt as shown in figure 6.1. The tilt can be adjusted to
a maximum of 15° forward or 5° backward.

NOTE: To lock the screen into the desired tilt
position, use locator hole to find tilt position hole.
Tighten IncreLok™ tilt locking screws on both tilt
brackets as shown in figure 6.1 and detail 2.

Adjusting the Tilt Angle of the Flat
Panel Screen

• Be careful not to pinch fingers when pushing screen

from the bottom.

CAUTION

BB and CC

AA

DETAIL 1

AA

DETAIL 2

fig 6.1

SAFETY

SCREW

IncreLok™

TILT LOCKING

SCREW

 LOCATOR

HOLE

TENSION

KNOB

fig 5.1

fig 5.2

© 2006 Peerless Industries, Inc.  All rights reserved.

Onemount is a trademark and Peerless is a registered trademark of Peerless Industries, Inc.

All other brand and product names are trademarks or registered trademarks of their respective owners.

TILT POSITION

HOLES

CS = center of screen

DETAIL 3

TENSION

KNOB

NOTE: For security, replace safety screw in each tilt
bracket with M5 x 30 security screw (HH) using
wrench (II).

Adjust brackets to full back tilt position and tighten.
Hook tilt brackets (BB and CC) onto wall plate (AA).
Then slowly swing screen in as shown. Turn safety
screws, using wrench (II), clockwise till fully
tightened down and screw tip securely contacts bottom
of the wall plates as shown in detail 1. of figure 5.1.
Center of screen can be adjusted horizontally no more
than 4" from center of the wall plate configuration, if
desired as shown in figure 5.2.

NOTE: To lock the screen down, tighten safety screws
to wall plate using a wrench (II) as shown in detail 1.

To remove screen from mount, loosen safety screws,
swing screen away from mount, and lift screen off of
mount.

CS

4"

• Do not tighten screws with excessive force.

Overtightening can cause damage to mount. Tighten
screws to 40 in. • lb (4.5 N.M.) maximum torque.

CAUTION

• Always use an assistant or mechanical lifting equip-

ment to safely lift and position the plasma television.

WARNING

Содержание OneMount ONE-TP


































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды