ISSUED: 07-31-09 SHEET #: 090-9183-2 10-29-09
Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-729-0307 or 708-865-8870.
7 of 7
Apply rubber bumpers (
M
) to bottom of base as shown in figure 5.1.
Carefully lift the full assembly to its upright position as shown in figure 5.2.
NoTe:
Be sure assembly rests on a flat, level surface to prevent the displays from tipping.
NoTe:
Leave a small gap between the displays to allow for horizontal pivot adjustment as shown below.
• Use two displays with this mount. Product may fail and damage property if not installed correctly.
WARNING
5
fig 5.1
fig 5.2
M
© 2009, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
