background image

ISSUED: 07-31-09   SHEET #: 090-9183-2   10-29-09

Visit the Peerless Web Site at www.peerlessmounts.com 

 

   For customer care call 1-800-729-0307 or 708-865-8870.

2 of 7

NoTe: 

Read entire instruction sheet before you start installation and assembly.

Table of Contents

Parts List

.................................................................................................................................................................................3

Cable Management

 ................................................................................................................................................................

4

Attaching VESA Plates to Display

 ..........................................................................................................................................5

Attaching Display to Dual Arm Assembly

................................................................................................................................

6

Attaching Dual Arm Assembly to Base

 ...................................................................................................................................

7

•  Do not begin to install your Peerless product until you have read and understood the instructions and warnings 

contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US 

customers please call Peerless customer care at 1-800-865-2112, for all international customers, please contact 

your local distributor.

•  This product should only be installed by someone of good mechanical aptitude, has experience with basic building 

construction, and fully understands these instructions.

•  Make sure that the supporting surface will safely support the combined load of the equipment and all attached 

hardware and components.

•  Never exceed the Maximum Load Capacity. See page one.
•  Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
•  Tighten screws firmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding 

power.

•  This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal 

injury.

WARNING

Содержание LCT-202








Отзывы: