Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-729-0307 or 708-865-8870.
6
of
9
ISSUED: 06-02-98 SHEET #: 128-9100-10 06-21-05
E
B
E
B
B
C
C
C
C
E
E
U
Note:
Slots in corners of top clamps (
E
) and corners of vertical support arms (
B
) allow for the installation of
safety belt (model
ACC 666,
sold separately). If using this belt, install it now as shown on page five.
Position TV onto support tray (
A
). Position anti-rollout hooks (
C
) against front edge of TV.
S
DETAIL 1
DETAIL 2
A
• Each anti-rollout hook (
C
) should have at least 1/4" of surface contact and fit snugly against the front edge of the
TV cabinet. If this is not the case, the support tray (
A
) must be adjusted smaller [see step 2], or the vertical
support arms (
B
) adjusted inward [see step 4].
WARNING
Insert and press down on top clamps (
E
) with sufficient force to assure that the top clamps are fitted snugly to
the TV cabinet.
Note:
Top clamps (
E
) fit between rollout protectors (
C
) and vertical support arms (
B
) [DETAIL 1].
Press down on each top clamp (
E
) while securely tightening each M6 screw (
S
).
Press inwards on the left and right vertical support arms (
B
) with sufficient force to assure that the arms are fitted
snugly to the TV cabinet. By hand, thread one M10 serrated flange head screw (
U
) into each vertical support arm
(
B
) through one of three threaded holes [1, 2, or 3; DETAIL 2]. Choose the threaded holes that will allow just
enough clearance (approximately 1 1/2") between the horizontal support arm and top clamps [see step 7]. Leave
about 1/4" of exposed thread.
