Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-729-0307 or 708-865-8870.
4
of
9
ISSUED: 06-02-98 SHEET #: 128-9100-10 06-21-05
R
S
T
B
C
D
D
C
B
Attach support tray (
A
) to vertical support arms (
B
) as shown. Choose the square hole which aligns closest
with the center of gravity mark on the TV (as determined in step 1).
Attach anti-rollout hooks (
C
) as shown
using M6 screws (
S
) and retainer bars (
D
).
A
Although top clamps (
E
) and anti-rollout
hooks (
C
) [see step 5] will provide more than
adequate support for the TV, some installers
may wish to also attach the support tray to
the TV bottom.
Using uni-clips (
X
) and M5 screws (
W
) (see
instruction card in fastener pack), or #10 x
3/4" particle board screws (
Z
) and washers
(
AA
) (for attachment to mounting bosses if
present), or a combination of both, attach
support tray (
A
) to TV bottom. [To do this
place TV upside down on a flat stable
surface and position support tray upside
down on TV bottom.] Attach at four places
as close to the four corners of the TV bottom
as possible.
Required for OSHPD approved installation - optional otherwise
X
W
Z
AA
TV BOTTOM
A
TV (UPSIDE DOWN)
D
C
Note:
Extruded side of retainer bar (
D
) goes towards
anti-rollout hook (
C
). Hand tighten only.
