4 of 4
ISSUED: 01-19-05 SHEET #: 009-9031-2 02-23-05
Position bottom shelf leg bosses onto legs by
hand. Then, using rubber mallet, proceed to
firmly seat legs into encapsulation cavities of
bottom shelf by rotating in stages around the
table until all legs are fully seated.
Pound casters into caster sockets on under
side of bottom shelf with rubber mallet.
G
I
H
J
Fasten cord wrap clip (
G
) and extension cord
(
H
) to top shelf using two screws (
I
) and two
wing nuts (
J
) as shown.
© 2005 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
O
P
Q
Locate back panel (
O
) and slide down into
grooves of two back legs. Take two side panels
(
P
) and slide into place. Take front panel (
Q
) and
slide into place with the lock positioned as shown.
LOCK
Step 6 is for model JCT-P2642CE only!
