3 of 4
ISSUED: 01-19-05 SHEET #: 009-9031-2 02-23-05
Use a rubber mallet (or optional metal hammer
with wood block) to firmly seat legs into leg
encapsulation cavities of the top shelf (
A
),
rotating around table in stages to avoid dam-
aging shelf or legs.
Separate legs by length. Lay top shelf (
A
) face
down on a flat, firm surface, preferably a non-
carpeted concrete floor. By hand, firmly push
the proper size legs that go between the top
shelf and the middle shelf (
B
) into place on leg
bosses.
Set middle shelf (
B
) onto legs from the top
shelf (
A
) and set legs onto the leg encapsula-
tion cavities by hand.
Use rubber mallet to firmly seat shelf (
B
) onto
legs, rotating around the table in stages to
avoid damaging shelf or legs.
A
A
A
B
B
16"
(4) 8 1/2" (top and bottom shelves only)
26"
(4) 18 1/2" (top and bottom shelves only)
34"
(4) 8 1/2" and (4) 16 1/2"
42"
(8) 16 1/2"
Desired
Unit
Height
Use These Legs
Now position legs that go between middle and
bottom shelves into place by hand. Use rubber
mallet to firmly seat into shelf, rotating around
the table in stages to avoid damage.
Note
: For
model JCT-P2642CE, use four grooved legs
(
N
) for this step.
A
B
For JCT-P1642E
24"
(4) grooved legs (top and bottom shelves only)
34"
(4) grooved legs and (4) 8 1/2"
42"
(4) grooved legs and (4) 16 1/2"
Desired
Unit
Height
Use These Legs
For JCT-P2642CE
