2
Introduction
The Peerless/Morel mini-monitor kit was designed with the goal of producing a “big” sound in a compact pack-
age. The woofer was selected for its clean midrange and good excursion capabilities, which allow it to produce
some of the best bass from a small driver. The tweeter is famous for its ability to produce very clean and clear
high frequencies, without being harsh or fatiguing.
Combined via a 2nd order acoustic crossover, these two drivers blend seamlessly to produce a full, rich sound.
The rolloff of the tweeter and woofer were specifically tailored with the use of notch filters to achieve a true 2nd
order slope.
Parts Inventory
Before beginning the assembly process, please inspect and confirm that you have all necessary components. If
you appear to be missing any components, please contact Parts Express customer service immediately.
Part #
Qty
Description
302-700(702,704)
1
.25 cu. ft. two way cabinet pair
999-230
2
Custom baffles
999-220
2
Crossover boards w/wires
999-240
1
Instruction manual
091-1245
2
Gold binding post pair
260-388
2
1-3/8" Adjustable port tube
260-516
2
1-1/2" x 24" x 18" Acoustic foam
081-435
26
#6 x 3/4" Phillips pan head screws
277-030
2
Morel MDT-20 1-1/8" Soft Dome Tweeter
297-630
2
Peerless 850108 5-1/2" Woofer
255-230
4
Jantzen .50 mH 18 ga inductor (L1 & L2)
255-234
2
Jantzen .60 mH 18 ga inductor (L3)
255-242
2
Jantzen .80 mH 18 ga inductor (L4)
027-421
2
Dayton 4 uF capacitor (C1)
027-432
2
Dayton 15 uF capacitor (C2)
027-438
2
Dayton 25 uF capacitor (C3)
027-442
2
Dayton 40 uF capacitor (C4)
004-4
4
Dayton 4 ohm Non-Inductive resistor (R1 & R2)
004-5.1
2
Dayton 5.1 ohm Non-Inductive resistor (R3)
004-8
2
Dayton 8 ohm Non-Inductive resistor (R4)
080-817
10
Cable ties
341-882
1
Silicone adhesive
269-300
1
Speaker sealing caulk
Loudspeaker Kit Assembly Instructions
By following these instructions and assembling the speakers in a conscientious manner, you will ensure that you
will be able to enjoy the speakers for many years to come. If there are any questions during the assembly
process, please feel free and contact our Technical Support staff at 1-800-338-0531.
Gather the Necessary Tools
The assembly of your speaker kit requires several basic tools and supplies, though more advanced tools can be
used if desired. The following list represents the most basic list of tools that are required:
Hammer
#2 Phillips head screwdriver or power driver
Small wrench or pliers
Soldering gun & solder
Silicone adhesive or hot-melt glue gun
Electronics cutters
Scissors or utility knife (for cutting foam)
