background image

2 of 12

ISSUED: 08-08-12   SHEET #: 009-9074-1  

NOTE:

 Read entire instruction sheet before you start installation and assembly. 

Table of Contents

Parts List............................................................................................................................................................................ 3, 4

Assembling Cart .....................................................................................................................................................................5

Installing Vertical Adapters to Flat Panel Display ...................................................................................................................9

Mounting Flat Panel Display .................................................................................................................................................11

Tools Needed for Assembly

• phillips screwdriver

•  Do not begin to install your Peerless product until you have read and understood the instructions and warnings 

contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US 
customers please call Peerless customer care at 1-800-865-2112, for all international customers, please contact 
your local distributor.

•  This product should only be installed by someone of good mechanical aptitude, and fully understands these 

instructions.

•  Never exceed the Maximum Load Capacity on page 1. 

•  Always use an assistant or mechanical lifting equipment to safely lift and position equipment.

• Tighten screws fi rmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding 

power.

•  The cart is not affi xed or secured to the fl oor, and may therefore tip over and/or fall if display and/or cart is shaken or 

hit. Always monitor children and do not let children play alone around cart as they could get hurt by a falling display. 
Not recommended for use in areas with heavy traffi c.

•  This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal 

injury.

 WARNING

Содержание SC590













Отзывы: