peerless-AV SC590 Скачать руководство пользователя страница 11

Страница: 11 / 12

11 of 12

ISSUED: 08-08-12 SHEET #: 009-9074-1

Mounting and Removing Flat Panel Display

Hook adapter brackets (

) onto universal plate (

then slowly swing display in as shown. Turn safety
screws, using security allen wrench (

), clockwise

at least six times to prevent display from being
removed as shown in detail 3.

NOTE:

To lock the display down, tighten safety

screws to wall plate as shown in cross section.

To remove display from mount, loosen safety
screws, swing display away from mount, and lift
display off of mount.

• Always use an assistant or mechanical lifting equipment to safely lift and position the fl at panel display.

WARNING

DETAIL 3

SAFETY

SCREWS

All other brand and product names are trademarks or registered trademarks of their respective owners.

Peerless Industries, Inc.

2300 White Oak Circle

Aurora, Il 60502

www.peerlessmounts.com

• Do not tighten screws with excessive force.

Overtightening can cause damage to mount.

Tighten

screws to 40 in. • lb (4.5 N.M.) maximum torque.

CAUTION

Содержание SC590













Результаты поиска

Содержание SC590

Отзывы:

Похожие инструкции для SC590

Бренды по названию

Популярные бренды

peerless-AV SC590, Инструкция по установке и сборке

Результаты поиска

Содержание SC590

Отзывы:

Похожие инструкции для SC590

Бренды по названию

Популярные бренды