background image

Visit the Peerless Web Site at www.peerlessmounts.com

ISSUED: 03-23-09  SHEET #:055-9260-5  09-26-12

2 of 9

Note:

 Read entire instruction sheet before you start installation and assembly. 

Tools Needed for Assembly

• stud fi nder ("edge to edge" stud fi nder recommended)

• level

• drill

•  5/32" drill bit for wood studs

•  5/16" dill bit for solid concrete and cinder block

• phillips screwdriver

Accessories

•  ACC-MIS550 (not evaluated by UL)
  (cable accessory kit)

•  ACC020 (not evaluated by UL)
  (Projector Security Cable kit)

•  WBK100 (not evaluated by UL)
  (wall plate accessory kit )

•  Do not begin to install your Peerless product until you have read and understood the instructions and warnings 

contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US 
customers please call Peerless customer care at 1-800-865-2112, for all international customers, please contact 
your local distributor.

•  This product should only be installed by someone of good mechanical aptitude, has experience with basic building 

construction, and fully understands these instructions.

•  Make sure that the supporting surface will safely support the combined load of the equipment and all attached 

hardware and components.

•  Never exceed the Maximum Load Capacity. See page one.

•  If mounting to wood wall studs, make sure that mounting screws are anchored into the center of the studs. Use of 

an "edge to edge" stud fi nder is highly recommended.

•  Always use an assistant or mechanical lifting equipment to safely lift and position equipment.

• Tighten screws fi rmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding 

power.

•  This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal 

injury.

•  This product was designed to be installed on the following wall construction only;

 

WALL CONSTRUCTION 

 

HARDWARE REQUIRED

 • 

 

Wood 

Stud   Included

 

  Wood Beam 

 

 

Included

 

  Solid Concrete 

 

 

Included

 

  Cinder Block 

 

 

Included

 

•  

Metal 

Stud   Contact 

Qualifi ed Professional (not evaluated by UL)

 

•  

Brick 

   Contact 

Qualifi ed Professional (not evaluated by UL)

 

•  

Other or unsure?   

 

Contact Qualifi ed Professional (not evaluated by UL)

 WARNING

Table of Contents

Parts List.................................................................................................................................................................................3

Installation to Wood Stud .................................................................................................................................................... 4,6

Installation to Solid Concrete/Cinder Block  ....................................................................................................................... 5,7

Assembly of Adjustment Tube  ...............................................................................................................................................8

Installing Projector Mount  ......................................................................................................................................................8

Routing Cables .......................................................................................................................................................................9

Содержание PSTA-028










Отзывы: