Via Monti Urali, 29 – 42122 Reggio Emilia (Italy) • Telephone: +39 0522 557735 • [email protected]
Figure 7: Connections to amplify only
JA12
. PRESET: “JA12”
Figure 8: Connections to amplify
JA12 plus JASW12 subwoofer
. PRESET: “JA12”
Figure 9: Connections for
JA4012
directional source. PRESET: “JA40”
DSP Remote Control
Hardware connections for Remote Control:
The USB connector allows to make the remote control of the DSP, to be more exact of the
part of the DSP dedicated to the user's control, as explained above. To do it, it is
necessary to install the
PS-NET Network Controller
software, available in the enclosed CD
(see the following paragraph).
The two EtherCon connectors are useful only in presence of other Sound Corporation
products with DSP on board, like
X-Treme
ampified speakers and processors. They must
be supported by
XT-NETINT
additional device. It allows to create a protocol on CAT. cable
(with RJ45 connectors) and to connect several products with DSP in cascade up to a one
kilometer cable, as it can singularly operate on each of them from the
Network Controller
software.
ADAPTER CABLE
ADAPTER CABLE
