63
ENGLISH |
CONFIGURING THE WI-FI CONNECTION
This menu can be used to activate the Wi-Fi reception device so that you can communicate with the outside (e.g. via laptop
PC or smartphone).
Open the menu
SELECT
ENABLE WIFI
and proceed as follows.
SELECT
ENABLE WIFI
• Press the
key to confirm the choice and enter the submenu
9
ENABLE WIFI
ENABLE:NO
• Press the
or
key to display the following:
– OFF to deactivate Wi-Fi
– ON to enable Wi-Fi.
• Press the
key to confirm the choice.
• Press the
key to exit from the menu.
RESETTING TO DEFAULT SETTINGS
This menu can be used to reset the control panel parameters when you want to return to the initial factory settings.
Open the menu
SELECT
RESTORE DEF
and proceed as follows.
SELECT
RESTORE DEF
• Press the
key to confirm the choice and enter the submenu
9
RESTORE DEF
CONFIRM?
• Press the
key to confirm that you want to reset the parameters and return the
control panel to the initial factory configuration.
• Press the
key to exit from the menu.
ALARMS
The control panel reports a range of alarms that may occur during system operation. All alarms appear on the display (AL-
LARME ) with the alarm code on the lower alphanumeric display.
XXX
EXT ALARM
If the control panel is in the ON state, i.e the pumps are enabled, and AL EXT is closed with
a NO voltage-free contact, the control panel enters the “EXT ALARM” (external alarm) state.
In this state, the pumps are not stopped, but are left running, and at the same time the EXT
ALARM relay is activated to generate an external acoustic and visual alarm. This is typically
used with an alarm float to warn that the water to be emptied has reached a critical level.
Continued
Содержание E1 MONO
Страница 2: ......
