PedigreeTechnologies.com | Support: (701)-499-0022
4
Installation Steps, Continued
Install Power Cable
CameraView
STEP ONE
Connect the micro USB cable to the camera.
STEP TWO
Route the cable inside the headliner to the power box. Cables and wiring should not be visible
after installation is complete.
STEP THREE
Connect the ground (black) wire to DC chassis ground.
• It may be necessary to crimp a ring terminal to the ground wire.
• Always connect the ground wire to an already established ground stud when possible.
• The frame of the vehicle is an acceptable ground point if ground studs are not available.
• The surface area must be clean and free of paint, rust, or anything that will cause the
connection to fail.
Black - Ground
Red - Power
Micro USB to Camera
