Pedigo P-2040 Скачать руководство пользователя страница 8

Страница: 8 / 40

AFETY

Blanket Warmer

▪

Operator’s Manual

▪

M N-39925

▪

Rev 2

▪

8/20

Safety Precautions

Before you begin

Read and understand all instructions in this manual.

Electrical precautions

Obey these electrical precautions when using the warmer:

▪

Connect the warmer to a properly grounded outlet. Do not use the warmer if it is

not properly grounded. Consult an electrician if there is any doubt that the outlet

used is properly grounded.

▪

Keep the cord away from hot surfaces.

▪

Do not attempt to service the warmer or its cord and plug, when plugged in.

▪

Do not operate the warmer if it has a damaged cord or plug.

▪

Do not immerse the cord or plug in water.

▪

Do not let the cord hang over the edge of a table or counter.

▪

Do not use an extension cord.

Usage precautions

Obey these usage precautions when using the warmer:

▪

Only use this warmer for its intended use of warming medical solution bags,

bottles, and/or blankets. Follow facility and solution manufacturer guidance

regarding warming temperature for any item to be placed in the warmer.

▪

Do not use this warmer for warming blood or blood products.

▪

Do not cover or block any of the openings of this warmer.

▪

Do not use this warmer in a wet location.

▪

Only clean the warmer when the power cord is unplugged.

▪

Do not use corrosive chemicals when cleaning the warmer.

▪

Do not use the warmer cavity for storage.

▪

Do not remove exterior panels from the warmer or attempt repairs. The warmer

has no user-serviceable internal components. Only perform routine cleaning and

maintenance procedures specifically described in this manual. Inspection and

servicing of internal components must only be performed by qualified service

personnel.

▪

Only a qualified Pedigo service representative may make modifications to the

warmer. Modifications to the warmer could be hazardous to users and patients.

Operator training

All personnel using the warmer must have proper operator training. Before

using the warmer:

▪

Read and understand the operating instructions contained in all the

documentation delivered with the warmer.

▪

Know the location and proper use of all controls.

▪

Keep this manual and all supplied instructions, diagrams, schematics, parts lists,

notices, and labels with the warmer if the warmer is sold or moved to another

location.

Содержание P-2040









































Результаты поиска

Содержание P-2040

Отзывы:

Похожие инструкции для P-2040

Бренды по названию

Популярные бренды

Pedigo P-2040, Руководство оператора

Результаты поиска

Содержание P-2040

Отзывы:

Похожие инструкции для P-2040

Бренды по названию

Популярные бренды