Pedigo P-2012, Инструкция по эксплуатации и уходу

Страница: 24 / 32

MN-36956/MM-1074 Rev 0 (01/15) • Blanket Warming Cabinet Operation & Care Manual • 22
PART NUMBERS AND DRAWINGS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
S E R V I C E
Always include both model and serial numbers in your correspondence
regarding the unit.
Model: _____________________________________
Serial Number: _____________________________________
Purchased From: _____________________________________
Date Installed: ____________ Voltage: _______________
SERIAL NUMBER IS REQUIRED FOR ALL INQUIRIES
O P T I O N S & A C C E S S O R I E S P A R T S L I S T
OPTIONS AND ACCESSORIES
P-2012 P-2022 P-2032 P-2032/PT
BUMPER & CASTER ASSEMBLY
3" (76mm)
caster
5017548 5017548 5017549 5018180
CASTER PACKAGE WITH PLATE
3" (76mm)
caster
5017544 5017544 5017545 5018124
CASTER PACKAGE WITHOUT PLATE 3" (76mm)
caster
5012693 5012693 — —
5" (76mm)
caster
— — 5018646 5018647
DOOR, RIGHT OR LEFT HINGED
Windowed door with manual door lock
5018007 5018008 5018009 5018009
Solid door with manual door lock 5018001 5018002 5018003 5018003
Solid door without manual door lock 5017762 5017763 5017764 5017764
SEISMIC MOUNTING BRACKETS
(special installation requirements apply)
contact factory contact factory contact factory contact factory
STACKING HARDWARE
P-2012 or P-2022 over P-2012 or P-2022 5017272 5017272 — —
P-2012 or P-2022 triple stacked
5017539 5017539 — —
F U S E R E P L A C E M E N T
Fuse replacement:
1.
Unplug power cord from wall outlet and
power switch assembly .
2.
Fuse compartment is located directly below
the plug receptacle. Use fi ngernail or thin
implement to fl ip compartment door open.
3.
Use fi ngernail or thin implement to pull
fuse drawer out from compartment .
4.
Use a thin implement to push fuses up
out of drawer .
5.
Replace with new fuse .
6.
Push drawer back into compartment .
7.
Close compartment door .
FU-34955
F2 FUSE
FU-34955
F1 FUSE
FUSE COMPARTMENT DOOR
FUSE DRAWER
WARNING!
FOR PROTECTION AGAINST FIRE
AND ELECTRICAL SHOCK
USE ONLY UL LISTED 10A, 250V
FAST ACTING FUSES, 5MM X 20MM
(F1, F2). ACCESS SHOULD
BE MADE BY QUALIFIED SERVICE
TECHNICIANS ONLY.
HOSPITAL GRADE CORD MUST
BE USED. REFER TO OPERATION
AND CARE MANUAL OR CONTACT
MANUFACTURER FOR ACCEPTABLE
CORDS. EQUIPMENT MUST BE
CONNECTED TO AN EQUIVALENT
RECEPTACLE MARKED “HOSPITAL GRADE”.
LA-29452
Z O N E H E A T I N G E L E M E N T L O C A T I O N S
ZONE
4
(
SHELF
)
{ EC 350/EC750
ONLY
}
ZONE
1
(
RIGHT SIDE
)
ZONE
3
(
BOTTOM
)
ZONE
2
(
LEFT SIDE
)
{ P-2022/P-2032
only
}