Peco Pro 12 DFS 37621231, Руководство оператора

Страница: 9 / 32

9
2-8 Aluminum Grass Container
Installation
NOTE: It is recommended that (3) people assist in
mounting the container. With three people available, two
can lower the container onto the frame while the third
person inserts the pivot pins P#(K0172) through the
holes. Insert the pins from the outside to the inside.
Secure with (1) 5/8” washer P#(K0058) and (1) 5/32” x
2-5/8” hair pin clip P#(K0088) per pivot pin (Figure 2-6b).
Reattach the bottom ends of the door opening linkages
to the main frame by using (1) Rue-Ring cotter pin
P#(K1437) per side. To test the functionality of the dump
mechanism, pull the lift handle away from the unit, and
lift upward. The door of the container should open and
the box should pivot clockwise towards the ground.
The linkage may be adjusted in two places, at the
adjusting screw P#(K1435) and the latch assembly
items. See page 20 for visual clarification. To change the
door closure tightness, screw the adjusting screw
(Figure 2-9) in or out. To adjust the latch, change the
length of the latch rod by screwing the latch adjusting
ball joint in or out. The latch hook pivot should be in the
middle of the slot in the latch hook pivot plate. Slide the
pivot back or forth and then re-tighten.
2-9 Dump Mechanism Adjustment
Rue-Ring
Cotter Pin
Adjustment
Screw
Figure 2-9
Figure 2-8a
Figure 2-8b
Washer
Hair Pin
Clip
Pivot
Pin
Attach
Here
Box Assembly