Peco Pro 12 DFS 37621231, Руководство оператора

Страница: 5 / 32

5
1-1 Introduction
NOTE : all references made to right, left, front, rear, top
or bottom are as viewed from the normal operator’s
position on the mower.
We are pleased to have you as a PECO customer. Your
collection system has been designed to give you a low
maintenance, simple, and effective way to collect the
grass clippings from your mower. This manual is
provided to give you the necessary instructions to
properly mount and operate the collection system on
your mower. Please read this manual thoroughly.
Understand what each control is for and how to use it.
Observe all safety decal precautions on the machine and
noted throughout the manual.
1-2 Description
The grass collection system is designed for turf
maintenance where there is a need to collect the grass
clippings as the mower cuts the turf. It is also used for
picking up leaves and in pre-season and post-season
clean-up. The blower, mounted on the right side of the
unit, uses a belt and gearbox system from the engine
PTO shaft. Drive train protection comes through belt
slippage. The blower is also available with an external
engine option of 5.5HP or 6.5HP. The blower draws
grass clippings from the discharge area of the cutter
deck back to the 12 cubic foot aluminum box at the rear
portion of the mower frame. The operator can engage
the blower with a push of the over-center linkage on the
right side of the unit, or starting the external engine.
Once the bags are full with clippings, they can be
released to make for easy dumping.
Section I - INTRODUCTION AND DESCRIPTION
PTO Drive
Engine Drive
Universal PTO
Assembly P#(A0623)
Engine/Blower/Blade Assembly
5.5HP Briggs and Stratton P#(A602)
or
Engine/Blower/Blade Assembly
6.5HP Briggs and Stratton P#(A639)