Peco 22651201, Руководство оператора

Страница: 12 / 54

12
PTO Mount Arm Installation (Continued)
Position the Mount Arm / Gusset (Item #1) to the right of the Mount Arm / Top Bracket (Item #2) and Mount Arm /
Bottom Bracket (Item #3). See Figure C. Secure the Mount Arm / Gusset, by using (4) 3/8”-16 x 1” Carriage Bolts
(Item #4) and (4) 3/8”-16 Ny-Flange Lock Nuts (Item #5). Refer to Figure C & Figure D below.
Figure C
Place the Receiver Tube Assembly (Item #1) between the Top & Bottom Mount Arm Brackets, see Figure E. Position
the Receiver Tube Assy back onto the tab of the Mount Arm Gusset and between the bolt holes of the Top & Bottom
Mount Arm Bracket, see Figure E and Figure F. Secure the Receiver Tube Assy by using (4) 3/8”-16 x 3.5” HHCS
(Item #2) and (4) 3/8”-16 Ny-Flange Lock Nuts (Item #3). Refer to Figure E.
Figure E
Figure D
Installed Mount Arm / Gusset
Figure F
PTO-X