NOTE:
WALL PLUGS SUPPLIED ARE ONLY SUITABLE FOR SOLID STONE/BRICK WALLS. PLEASE ENSURE THE SCREWS ARE FULLY TIGHT.
INSTALLATION GUIDE
Installation Procedure
1.
NOTE:
ADDITIONAL FIXINGS REQUIRED TO ALLOW INSTALLATION ON PLASTERBOARD WALLS
Open the carton and make sure all the parts listed below are present.
2.
Mark a desired height of the mirror. Drill the required holes and insert the wall plugs. This mirror can
be mounted portrait or landscape. The drain hole at the bottom of the product should be sealed by
a blind rubber grommet.
3.
Make the electrical connections ensuring first that the electrical supply has been turned off. This mirror is a class
1 product and requires an earth connection. It should be installed in accordance with the latest IEE regulations.
500.50.60
740
500.50.61
640
500.50.62
640
500.50.63
940
540
440
440
540
B
A
B
Live Terminal
Earth Terminal
Output Wires
1X
4X
4X
