Peavey VYPYR 100, Руководство игрока

Страница: 32 / 76

The THIRD encoder from the left is the EFFECTS SELECTOR. This
encoder selects any desired “rack” effect. The term Rack Effect is
used to identify effect devices that would typically be found con-
nected to the effects loop on an amplifier. These units are commonly
designed to fit in a 19” wide rack, thus “rack effects.” These effects
are usually POST INPUT, post EQ and SOUND DISTINCTLY DIF -
FERENT than PRE amplifier effects (Stompboxes). To select your
effect, simply turn the encoder so the LED is adjacent to the effect you
desire.
Octaver
Just as the name implies, this effect will produce a tone one octave below the note you are playing.
Parameter Adjustments: P1 Mix (Amount of effect VS dry signal), P2 Octave level
Phaser
Unlike the Analog Phaser model on the Stompbox encoder, this phaser utilizes an eight stage process.
Bottom line, much more of a phasing sound than you will find in a “Stompbox.” Parameter Adjust -
ments: P1 Speed, P2 Depth
Rotary
This effect simulates the sound of a ROTATING SPEAKER. Listen carefully to this effect and you
will notice as the simulated speaker rotates you will hear a pitch shift due to the Doppler effect. Pa-
rameter Adjustments: P1 Speed, P2 Depth.
Reverse
As the name implies, just play something and it will play it back in reverse. This effect is a ton of fun
and will make YOU the life of every party! Parameter Adjustments: P1 Time, P2 Mix
Pitch Shifter
A great way to change the pitch of the note you are playing! With the Sanpera I or II optional foot -
switch, you can assign this effect to the foot controller and sweep from the original note to the note
selected in the parameter adjustment. Parameter Adjustments: P1 Interval, P2 Mix.
Effects Encoder