Net Weight:
51 lbs. (23.2 kg)
ELECTRONICS AND AMPLIFIER SPECIFICATIONS:
Internal power amplifiers (@120 VAC line):
Total of 830 watts peak available dynamic power
Woofer - 630 watts peak available dynamic power
Continuous Power*:
230 watts @ less than 1% distortion
Tweeter - 200 watts peak available dynamic power
Continuous Power:
90 watts @ less than 1% distortion.
* Before thermal pull-back activates.
Electronic Input Impedance (Nominal):
Line: 2.2 k ohms balanced (1/4”), 10 k ohms unbalanced 1/4”
Mic: 2.2 k ohms balanced (XLR) No phantom power available.
Input Sensitivity for Full Output (Level full CW):
0.48V RMS in the Line position,
0.01V RMS in the Mic position.
Infrasonic filter protection:
36 dB/octave roll-off
Nominal Amplifier Frequency Response:
+0, -3 dB from 20 Hz to 20 kHz
Hum and Noise:
Greater than 90 dB below rated power
THD and IM:
Typically less than 0.5 %
Damping Factor:
Greater than 100 @ 1000 Hz, 8 Ohms
Power requirements of Peavey PVXp 15 System:
Nominal 120 Watts, 100-240 VAC 50-60 Hz
*specifications and features subject to change without notice.
