SPECIFICATIONS PVM
™
480
A rugged, machined brass housing ensures top
performance, even after abuse. The black, hard-coat
finish is very resistant to damage. (An optional white
finish is available.)
With its exemplary combination of features, the PVM
480 is ideally suited to the most exacting reproduction
applications—including digital sampling, studio and
location recording, instrumental pickup, studio and
remote broadcasting, podiums and many more.
ARCHITECTURAL & ENGINEERING
SPECIFICATIONS
The microphone shall be a permanently polarized
condenser type employing a back-electret with a
frequency response of from 40 Hz to 20 kHz. The
microphone shall have a supercardioid characteristic
with a null rear response which is typically 20 dB
down. The microphone shall have an output of -46
dBV per Pascal where 1 Pascal = 94 dB of SPL with no
load (open circuit).
The microphone shall have a black hard-coat finish on
a machined case. The connector shall be a three-pin
XLR equivalent audio type. A swivel adaptor shall be
provided for mounting to a stand having 5/8" - 27
thread. The microphone shall have overall dimensions
of 5-3/8" in length and 1-7/8" in diameter. The
microphone shall be a Peavey model PVM 480 or
equivalent.
2-YEAR LIMITED WARRANTY
NOTE:
For details, refer to the warranty statement. For
copies of this statement, contact Peavey Electronics
Corporation, at P.O. Box 2898, Meridian, Mississippi
39301-2898, or go online to www.peavey.com.
2
5.39"
(136.9 cm)
.87"
(22.1 cm)
