33
(4) Connecting mics or cable: Before making these connections, power down the
transmitter to prevent damage. Make these connections by plugging
the connector into the AF input jack (1) and tightening the locking connector
down by rotating it in a clockwise direction as illustrated in Fig.5. Then power
unit up again.
(5) Adjust Gain Control: Depending on the application of the transmitter, it may be
necessary to make adjustments to the Gain Control. Viewing the AF signal level
present on the front panel of the receiver may help to determine if adjustments
need to be made.
4. AF 4-PIN INPUT CONNECTION METHODS
