21
(e)
NAME:
Indicates or sets up the name of the receiver. This allows you to give a
six character identification to the receiver (i.e. user's name, instrument name
etc.). This is extremely helpful when in a rack or with other devices.
Selecting/Setting Name:
Press the "MENU" button until the "NAME" function is selected. This will
be indicated by a block that will appear around the selected function located in
the upper right corner of the display.
Press and hold the "GROUP”
▲
button or the "SCAN"
▼
button. The
character in the far left position will start to blink (if the character is a space it
will not blink). This will allow you to scroll through letters, numbers and
char, -, / and space. When the character desired is reached, again
press the "MENU" button to proceed to the second position character. Then
repeat process until all six are completed. Press the Menu button to save and
escape the function.
