Peavey MMA81502, Руководство пользователя

Страница: 11 / 48

11
M MM MA A8 8115 50 02 2 ((2 23 30 0V V))
M MM MA A8 87 75 52 2 ((112 20 0//2 23 30 0V V))
Figure 5
Figure 6
The loudspeaker outputs of the mixer/amplifier are 4 Ohms, 8 Ohms, 70V and 100V. C Co on nn ne ecctt
tth he e llo ou ud dssp pe ea ak ke err ssy ysstte em m tto o a an ny y O ON NE E o off tth he esse e o ou uttp pu uttss.. Class 2 wiring may be used.
There are two types of output: 4 Ohm Direct Output;
8 Ohm, 70V, and 100V via Output Transformer
The method of connection differs in each case. Refer to FFiig gu urre e 5 5. If using the transformer
isolated outputs be sure that the Low Cut switch is ON.
Note: Impedance values shown in Figure 5 indicate total loudspeaker system (load) impedance.
The loudspeaker outputs of the mixer/amplifier are 4 Ohms, 8 Ohms/25V, 70V and 100V.
Connect the loudspeaker system tto
o any ONE of these outputs. Class 2 wiring may be used.
There are two types of output: 4 Ohm Direct Output;
8 Ohm/25V, 70V, and 100V via Output Transformer
The method of connection differs in each case. Refer to FFiig gu urre e 6 6. If using the transformer
isolated outputs be sure that the Low Cut switch is ON.
Note: Impedance values shown in Figure 6 indicate total loudspeaker system (load) impedance.