Peavey MediaMatrix xControl LCD, Руководство по оборудованию

Страница: 26 / 36

Chapter 5 - Installing the unit
22 Version 2.0.0.0 July 7, 2017
Set up Bi-directional control
required Switch position
Single unit or unit at end of
chain, one cable connected Yes Out
No In
Unit in middle of chain, two
cables connected Yes Out
No Out
5. Using a small Philips head screwdriver, carefully position the rotary Mode selector switch
to select the right mode of operation, or to test the unit.
Position Mode
1 PASHA protocol mode. This is the default mode.
When the unit powers up, you will be prompted to
log on. You must enter a valid user passcode before
you can change settings using the front panel