(12) Layer Controls:
Layer Follow
: When the Layer Follow button is lit, the layer on the control surface follows the layer selec
tion on the associated Mixer screen. However, the “ALL” layer is not a valid selection for tactus.control.
When “ALL is selected, tactus.control remains on the previously selected layer.
Up and Down
: The up and down buttons can be used to change control layers on tactus control. If the
control surface is following the layer selection of one of mixer layer, the layer selection on the screen will
also change. However, if the control surface is not following the screen, the UP/Down buttons will change
the layer selection on the surface only. “All” cannot be selected using the up/down buttons.
(13) Cue System:
Solo Clear is lit whenever a Cue button is pressed. Pressing Solo Clear, Clears all of the Cue selections in the
console. The Cue encoder adjusts the cue system Master level.
(14) Control Knob:
The control knob is actually one of the most important controls on the tactus.control surface. Whatever control
is selected on one of the mixer screens is selected for control with this knob. Simply touching a knob button or
Aux slider brings immediate control of that function to the control knob. Pressing the control also works for
switch controls.
Dimensions:
With Back supports: W x D x H: 24.6” x 12.6” x 3” (62.5 cm x 32 cm x 7.6 cm)
Without Back supports: W x D x H 24.6” x 12.6” x 1.6” (62.5 cm x 32 cm x 4.1 cm)
Note: this does not include the height of the knobs which extend up to 0.5” (12.7 cm)
above the top surface.
Weight:
9.75 lbs (4.43 kg)
Power Requirements: 19VDC 4.7A
External Power supply
Dimensions:
L x W x H: 7 x 2.5 x 1.5
Power supply Input: 100-240VAC 50/60 Hz
Power Supply Output: 19VDC 6.32A
Weight:
9.75 lbs (4.43 kg)
Specifications
