SPECIFICATIONS PVM
™
22
The most significant advances in the microphone
industry have been made through the utilization of high-
tech polymers. We are proud to say that we are always
at the forefront of this technology by utilizing the latest
designs. By doing so, we have developed a new shock
mounting system that reduces handling noise, cable
noise and noise picked up by the mic stand.
By combining the latest in technologies, performance,
styling and durability, the Peavey PVM 22 microphone
is the professionals choice for the sound reinforcement
industry.
ARCHITECTURAL & ENGINEERING
SPECIFICATIONS
The microphone shall be a moving-coil dynamic
with a frequency response of 50 Hz to 16 kHz. The
microphone shall have a cardioid characteristic
typically 20 dB down from the front response. The
microphone shall have an output of -48 dBV per
Pascal where 1 Pascal = 94 dB of SPL with no load
(open circuit).
The microphone shall have a black rubberized
finish that can withstand the toughest conditions.
The microphone uses a standard mic clip for stand
mounting. The connector shall be a three-pin XLR
equivalent audio type.
PROXIMITY
Proximity effect is a naturally occurring phenomenon in
unidirectional microphones. The effect is to accentuate
or boost the low frequency response. This effect is a
function of distance from the diaphragm to the source
and increases as the diaphragm is moved closer to the
source.
2-YEAR LIMITED WARRANTY
NOTE:
For details, refer to the warranty statement. For
copies of this statement, contact Peavey Electronics
Corporation, at P.O. Box 2898, Meridian, Mississippi
39301-2898, or go online to www.peavey.com.
2
Frequency Response
2"
13/16"
2
1/4"
6
3/8"
