Pearpoint Flexitrax P550c, Руководство по эксплуатации

Страница: 23 / 285

P550c Operation Manual
2 Quick Start
www.pearpoint.com | 23
2 Quick Start
Note: This section provides quick start instructions for experienced users only. We recommend that
new users read this manual fully before proceeding.
To get started with the P550c system, follow these steps:
1 Make sure the PSU, whether separate or part of the powered drum, and controller are both powered
off.
Note: This Quick Start section assumes that the controller battery is charged. For details about
charging the battery, see page 87 .
2 Set up the controller:
a. (Optional) Mount the controller onto the drum using the supplied clamp.
b. Connect the drum to the controller using the link cable (item 4 on page 30 ).
c. Connect the drum to the down-hole equipment relevant to the survey required.
3 Turn the power switch on the PSU and press the power button on the controller to turn the system
on.
The controller takes around 15 seconds to display the first screen.