A
B
C
A B
C
Key Bolt
PowerShifter
The PowerShifter function allows you to change the feel and
action of the pedal by shifting the footboard position back
and forth. To change the position, loosen the Key Bolt in the
heel of the footboard and move the footboard to the desired
position: A, B or C. Tighten the Key Bolt again (Fig.13).
Rubber Mats
To maximize traction of the rubber mats underneath the
Power Plate keep them clean and dust free using a damp
cotton towel.
Fig.13
Make sure that the heel is flush with the Power Plate to prevent
damage to the pedal.
Note
http://www.pearldrum.com
Products and specifications are subject to change without notice.
Printed in China
-1406-
A:
Strong
B:
Normal
C:
Light
CAUTION
Periodically check all Allen Screws for tightness and
tighten them with the provided Allen Wrenches as
needed.
Periodically apply lube to all moving parts such as the
Chain, Cam Roller, Footboard Hinge, etc. for optimal
speed and extended life of your pedal. Bearings
should be lubricated with grease, not liquid oil.
Traction Plate
Traction Grip Dots
Traction Grip and Traction Plate Adjustment
The Traction Grip Dots can be totally removed or inserted as
needed to custom tailor the amount of traction for your
personal playing style. To remove the Traction Grip Dots,
loosen the Allen screws holding the Traction Plate with the
provided hexagonal wrench and remove the Traction Plate
from the footboard (Fig.11). The Traction Plate is also
reversible to provide just the right amount of grip at either
the front or rear of the footboard (Fig.12).
When putting the Traction Plate back, finger-tighten the four screws
to prevent cross-threading; then tighten the screws securely.
Do not use the Pedal without the Traction Plate mounted. It could
cause injury to your foot.
Note
Fig.11
Fig.12
