Bolt
Click Lock
Key Bolt
(Uni-Lock
Footboard
Angle Cam)
Dum Key
Lower Nut
. Converting the Slave Side Pedal
To change the Slave Side of a P-3002C Double
Pedal into a Single Pedal, detach the Spring
Assembly and the Beater Holder Link from the Left
Post of the P-3002C Double Pedal and transfer
them to the Slave Side Pedal.
To detach the Spring Assembly, disengage the
Click-Lock (Fig.23-a) and remove the Lower Nut
(Fig.23-b) and remove the threaded Bolt from the
post. Loosen the Key Bolt (Fig.23-c) and remove
the Uni-Lock Footboard Angle Cam from the post
(Fig.23-d). Gently spread the Click Lock apart and
remove it from the post (Fig.23-e). Use caution to
prevent the Click Lock from deforming. To detach
the Beater Holder Link, remove the Key Bolt with
the Multi-Function Drum Key, open the clamp and
remove it from the shaft (Fig.23-f).
Slave Side Pedal
Main Pedal
. Converting the Main Pedal
To convert the Main Pedal to a Single Pedal, turn
the pedal over and remove the two Flat Head
Screws with the provided Multi-Function Drum Key
or Allen wrench (3mm) and detach the Hoop
Clamp (Fig.20).
Modular Post System
The P-3002C features Pearl’s Modular Post
System that allows easy conversion from a Double
Pedal to two Single Pedals.
Remove the four Flat Head Screws under the Left
Post with the provided Multi-Function Drum Key or
Allen wrench (3mm), and detach the Left Post
(Fig.21).
Reattach the Hoop Clamp in the position shown
with two Flat Head Screws using the provided
Multi-Function Drum Key or Allen wrench (Fig.22).
Your Main Pedal is now ready to be used as a
Single Pedal.
Fig.20
Fig.21
Fig.22
Fig.23
Beater
Holder Link
CAUTION
Optional Items
(sold separately)
. Control Core Wood Beater (B-300W)
. Traction Rubber Grip (NP-283N/7)
. Pedal Stabilizer ( PS-300 )
. NiNjA Oil ( OL-300 )
Oil
The P-3002C features precision
NiNjA
bearings for
incredible speed and smoothness. To keep them
functioning at their maximum speed and
performance it's recommended that you apply
genuine
NiNjA
Oil at regular intervals (Fig.25).
NiNjA
Oil is also ideal for use on the footboard
hinges to maintain "like-new" performance (Fig.26).
<a>
<b>
<c>
<f>
<d>
<e>
Reverse the previous sequence and attach the
Spring Assembly, Beater Holder Link and the
Beater to the Slave Side Pedal. Change the
position of the Key Bolt as shown on the Uni-Lock
Footboard Angle Cam for easier access when
making Footboard angle adjustments (Fig.24).
Your Slave Side Pedal is now ready to be used as
a Single Pedal.
Fig.24
Fig.25
Fig.26
Check all Key Bolts and Allen Screws
for tightness before performances, and
tighten them with the provided
Multi-Function Drum Key or Allen
wrenches as needed.
Spring
Assembly
https://www.pearldrum.com
Products and specifications are subject to change without notice.
Printed in China
-Jan 2021-
Note
For best results, always use genuine NiNjA Oil.
