Pearl Abrasive VX10.2XLPRO, Руководство пользователя

Страница: 14 / 24

– 14 –
1. Turn off the saw before proceeding any further.
2. Loosen and remove the belt guard screws and
take off the belt guard.
3. Loosen the 4 nuts (front & back) on the
mounting plate.
4. Gently loosen the motor adjustment clip on the
very rear of the motor mounting plate.
5. Carefully nudge the motor slightly forward, so
there is a little slack in the belt.
6. Take off the old belt and replace with new belt.
7. To re-assemble, follow steps in reverse order.
xii. BELT REPLACEMENT
xiii. REPLACEMENT PARTS LIST
VX7.2XL MOTOR ASSEMBLY
1
2
3
4
5
6
7
8
9
10
11
31
12
13
16
17
18
19
20
21
23
24 25
26
28
27
29
30
32
14
15
1 Power Cable PSV07010
2 3/4 HP Electrical Industrial Motor PSV07014
3 Motor Shaft Pulley PSV07015
4 Motor Adjustment Clip with Screw PSV07025
5 Mounting Plate PSV07026
6 Belt Guard Bracket PSV07017
7 Timing T Shape Nylon Belt PSV07032
8 Belt Guard PSV07016
9 Belt Guard Screws (5) PSV07033
10 Blade Shaft PSV00003
11 Blade Shaft Pulley PSV07019
12 Bearing Housing Hold Down Bracket PSV00009
13 Liquid Cooled Bearing Housing PSV00007
14 Inner Flange PSV07030
15 Outer Flange PSV07031
16 Blade Lock Nut PSV00004
17 Blade Guard PSV07021
18 Blade Guard Adjustment Knob PSV07022
19 Circuit Breaker PSV07024
20 Power Toggle Switch PSV00001
21 Power Switch Housing PSV00002
(Includes: Toggle Switch, Circuit Breaker, Power Cable)
23 Motor Protection Cover Shield PSV07035
24 Carbon Brushes (set of 2) PSV07036
25 Brush Caps PSV07037
26 Bearing Housing Screws & Nuts PSV07038
27 Water Flow “T” Adapter PSV00005
28 Water Flow “L” Adapter PSV00008
29 Rubber Splash Guard PSV07023
30 Water Pump PSV00006
31 Pulley Lock Pin PSV00011
32 Water Tubing PSV00040
33 7" Blade DTL07B19
34 Screen Filter Cover PSV00006S
PART NAME PART NUMBER PART NAME PART NUMBER
Figure 13
34
33