Pearl Abrasive 9566, Руководство владельца/оператора

Страница: 2 / 8

– 2 –
WHEN THE MACHINE IS DELIVERED
Check the carton carefully for signs of rough handling.
Remove the machine from the carton. If the machine is
damaged, notify the carrier IMMEDIATELY and request an
inspection. Be sure to keep the carton, packing inserts,
packing lists and carrier’s receipt until the inspector has
verified your claim.
Pearl’s liability ceases when the carrier picks up the
shipment but our customer service staff will be glad to
furnish any information needed in connection with the
claim and will expedite repair of the machine.
BEFORE OPERATING THE
MACHINE
Read the manual carefully and completely before
attempting to operate the unit. This manual has important
information for the use and safe operation of the machine.
Keep this manual handy at all times. This machine will
assure years of satisfactory service if operated and
maintained according to recommendations in this manual.
If additional information is needed, please contact: 800-
969-5561
All information and specifications printed in the manual
and parts list are current at the time of printing; however,
because of Pearl’s policy of continual product
development, we reserve the right to make changes at any
time without notice.
WARNING! To reduce the risk of fire,
electric shock or injury:
• Do not operate the machine unless trained and
authorized.
• Do not leave the machine when plugged in. Unplug
from the outlet when not in use, before servicing, and
when changing the brushes or pads.
• Use indoors only.
• Do not allow to be used as a toy. Close attention is
necessary when used by or near children.
• Do not bypass or defeat the safety “lock-out lever.”
• The machine was designed for use as per instruction
and recommendations written in this manual. Any
deviation from its proper use or purpose and the
consequential damage that may occur is the sole
responsibility of the end user.
• Do not use with damaged cord or plug. If the machine
is not working as it should, or it has been dropped,
damaged, left outdoors or dropped into water, return it
to an authorized service center.
• Do not pull or carry by cord, use cord as handle, close a
door on the cord or pull cord around sharp edges or
corners. Do not run machine over cord. Keep cord
away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the
plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Make sure the machine is plugged into an electrical
outlet with the same voltage and frequency rating as
shown on the nameplate of the machine. Do not
attempt to plug a 115- volt machine into a 230- volt
outlet.
• Do not immerse or use this machine in standing water.
Such use can cause electric shock.
• Keep the electrical supply cord from contacting the
rotating brush or drive block.
• Do not expose machine to freezing temperatures.
• To avoid electric shock, do not expose the unit to rain.
Store indoors only.
• Connect to a properly grounded outlet only. See
“Grounding Instructions.”
• Turn off all controls before unplugging.
• When using an extension cord, use a 3 conductor
grounding cord, 12 gauge wire or heavier. Do not use
more than 25’ extension cord.
• Do not put any object into openings. Do not use with
any opening blocked. Keep free of dust, lint, hair and
anything that may reduce air flow.
• Do not operate machine in flammable or explosive
areas.
• All servicing of Pearl’s equipment should be performed
by Pearl authorized service center.
• Keep hair, loose clothing, fingers and all parts of body
away from openings and moving parts.
• Use extra care when cleaning on stairs. When servicing
machine, use manufacturer’s supplied or approved
replacement parts.
FAILURE TO COMPLY WITH THE ABOVE WARNING
INSTRUCTIONS WILL VOID THE WARRANTY.
GROUNDING
INSTRUCTIONS
Machine must be grounded.
If it should malfunction or
breakdown, grounding
provides a path of least
Fig. 1