6
Operation
1
Turning the pump on
□
Connect the pump power cord to a GFCI outlet. Water
begins to flow through the fountain.
NOTE
: To eliminate the possibility of water damage around
your fountain, check for leaks and excessive splashing after
the initial setup of your fountain. If the water flow from the
basins is uneven then check to see if the fountain is level. It is
highly recommended this fountain be placed in an area where
it cannot be damaged should the area become wet and
unstable.
NOTE
: Do not leave your fountain running for extended
periods of time when no one is present to observe the
performance and water level.
Care and Maintenance
WATER MAINTENANCE
□
It is recommended that you fill your fountain with distilled water. Distilled water is pure and should have no minerals or sediment in
it. It will extend the life of the pump and the time between cleanings. If distilled water is not an option, use filtered water, as water
directly from your tap will generally have minerals and chemicals that can build up and leave behind residue on your fountain.
□
Check the water level regularly to ensure the pump is completely submerged during operation. This is necessary ensure proper
cooling of the pump and prevent overheating. In summer months, or dry, hot climates, water evaporates very quickly, so it may be
necessary to check the water level every day. The rate of water evaporation will also be greater with larger fountains, with more
surface area, than smaller fountains.
MAINTAINING THE FOUNTAIN
□
Keep the fountain water and pump clean and clear of debris. If placed under a tree or near vegetation, you may need to scoop out
leaves and other debris every other day. Water treatments that prevent algae growth and mineral deposits are available at your local
home & garden stores.
□
If the fountain is not in use for an extended period of time, disconnect the power and empty all the water from the fountain. Do not tip
the fountain to empty the water. Use a siphon pump or a small bucket.
□
The fountain should not be operated in temperatures below 41°F (5°C) to prevent frost damage. During winter months, before the
temperature hits freezing, disconnect the power, drain your fountain and store it in a heated area. If the fountain is stored outdoors in
freezing temperatures, disconnect the power, empty all the water from the fountain, remove the pump and any lights if possible,
make sure it is completely dry and cover it with a tarp. Any water left in the fountain may freeze and expand causing the fountain to
crack.
