PEAKTOP HF36501AA-EU, Инструкция по использованию и уходу

Страница: 8 / 19

8 of 1 9

Always use the pressure regulator and hose assembly provided with the appliance to connect to a LP gas
cylinder. Never connect to an unregulated LP gas supply.

Contact your retailer’s customer service department for replacement parts.

Hand turn the manual gas control valve. Never use tools. If the valve will not turn by hand, do not try to repair
it. Call a certified gas technician. The use of force or any self attempted repair may result in a fire or explosion.

Use only the type of gas and the type of LPG cylinder specified by the manufacturer.

Appliance is fitted with gas regulator, flexible gas rubber pipe and clamps according to the National Rules in
force of the country of destination.

Appliance must use an approved gas regulator (approved for a working temperature not lower than 50 ˚C)
according to the EN Standard (see minimum, nominal and maximum pressure on page 11 - gas regulator
inlet and outlet connection according to the National Rules in force) and flexible gas rubber pipe according to
EN 16436-1 (with proper inner diameter according to gas inlet connection and National Rules in force) with a
length not over 3.0 m and approved for a working temperature not lower than 60 ˚C. When substitution will be
necessary, you have to purchase suitable gas regulator, flexible gas rubber pipe and clamps from your local
gas dealer; gas regulator should be substituted not over 10 years.

Flexible gas rubber pipe must be carefully , avoiding any twisting. Never use a damaged gas regulator.

Never connect this appliance to an unregulated LPG source (gas regulator is mandatory to be used).

When the appliance is not in use, turn the LPG cylinder in “OFF” position.

Always perform a leakage test on gas connections whenever a LPG cylinder is connected. If bubbles form in
Flexible gas rubber pipe must be located in the LPG compartment carefully, avoiding any twisting.

Never use a damaged gas regulator.

Always perform a leakage test on gas connections whenever a LPG cylinder is connected. If bubbles form in
the leakage test solution, do not use it. Never use a flame to test for leakages.
It is strictly forbidden and
dangerous!

to change the gas cylinder in a amply ventilated area, away from any ignition source.

The tanker is away form the fireplace 60 inch.(see below picture).