PEAKTOP HF36501AA-EU, Инструкция по использованию и уходу

Страница: 6 / 19

6 of 1 9

Do NOT attempt to move or store this outdoor fireplace until all parts are cool.

Do NOT lean over this outdoor fireplace when lighting or when in use.

Use only the regulator and hose assembly provided. Use only replacement regulator and hose assemblies
specified by the manufacturer.

Storage of this outdoor fireplace indoors is permissible only if the tank is disconnected, removed from the
outdoor fireplace and properly stored outdoors.

Do not attempt to disconnect the gas regulator from the tank or any gas fitting while the outdoor fireplace is in
use.

Always shut off gas supply at the tank valve and disconnect regulator from the tank when the fireplace is not
in use.

Do NOT sit on the mantle when the unit is in operation.

Do not throw anything onto the fire when the unit is in operation.

Lava rocks are very hot; please keep children or pets away at a safe distance.

It is essential to keep the outdoor fireplace valve compartment, burners, and circulating air passages clean.
Inspect outdoor fireplace for debris before each use.

Prior to each gas fireplace operation, check the hose for evidence of excessive abrasion or wear by looking
through the visual check hole. If the hose is damaged, cut or cracked, it must be replaced before using the
gas fireplace. The hose assembly can only be replaced by a hose assembly specified by the manufacturer.

Before each use, remove the lava rocks. Examine the burner and its components. If dirty, clean with a soft
brush and soapy water solution. Also examine the area around the burner. Any dirt or foreign material, such
as spider webs or nests in this area should be removed. If it is evident that the burner is damaged, it must be
replaced be-fore the gas fireplace is used.

The burner assembly can only be replaced by a burner specified by the manufacturer. Place the hose out of
the pathways where people may trip over it.

Do Not cross the hose between outdoor fireplace and the propane tank.

Before installation, ensure that the local distribution conditions (identification of the type of gas and
pressure) and the adjustment of the appliance are compatible.

the appliance shall be connected in accordance with national regulations.

any air supply shall be in accordance with national regulations.

WARNING: When the national conditions require it, it's necessary to change the
flexible tube.