Cleaning the cabinet
Prior to cleaning the cabinet, withdraw the mains plug from the power outlet.
Clean only with a damp, soft cloth and a commercially available mild household cleanser. Ensure
that no water gets inside the equipment to prevent possible shorts and damage to the equipment.
Introduction
The model
PeakTech
®
6145 regulated power supply has two ways adjustable output. The two
adjustable outputs can also be selected for constant voltage or constant currant, designed in high
stability and performance circuit. In constant voltage state, the output voltage can be arbitrarily
from 0 V on the nominal range; and in the state of constant current, the output current can be
adjustable from 0 A on the nominal range. The two outputs can be connected in parallel or in
series, while the master used for voltage or current adjustment. The maximum output voltage in
series is double of independent’s, and the maximum output current in parallel is double too.
There are volt and Amp meters (or 3 digit LCD) for indicating each of the two outputs with high
accuracy. The one fixed way output 5 V voltage. Due to the single chip integrated regulator, this
output has good stability and ripple factor, and has reliable overload protection to protect the unit
against being damaged whenever overload or short circuit.
The unit features in small size, good performance, novel appearance and etc, it is the ideal power
supply unit for science investigation, college, factory, electronic appliance maintenance and etc.
Permanent operations
The power supply provides 2 adjustable outputs for a maximum current of 5 A DC, which can be
connected in series or parallel, that means a maximum output of 10 A in parallel.
To extend the operational life span of the power supply, we recommend you to limit the working
time under full load to eight hours.
-8-
