8.1. Data Logger
1. Storing Data
Your thermometer is capable of storing up to 20 data
locations. The infrared temperature and temperature
scale (°C or °F) are also stored.
2. Infrared
To store data from an infrared reading, pull the
trigger. While holding the trigger, press the MODE
button until LOG appears in the lower left corner of
the display; a log location number will be shown. If no
temperature has been recorded in the shown LOG
location, 4 dashes will appear in the lower right
corner. Aim the unit at the target area you want to
record and press the laser/backlight button. The
recorded temperature will appear in the lower right
corner. To select another log location, press the up
and down keys.
3. Recalling Data
To recall stored data after the unit shuts off, press the
MODE button until LOG appears in the lower left
corner. A LOG location number will be shown below
LOG and the stored temperature for that location will
be displayed. To move to another LOG location,
press the UP and DOWN keys.
-47-
