5.11. Temperature measurements
Warning:
To avoid electric shock, disconnect both test probes from any
source of voltage before making a temperature measurement.
Insert the adapter in the input socket (+ to µA/mA and – to COM-
socket) for temperature measurements.
Insert the temperature probe into the temperature adaptor,
making sure to observe the correct polarity. Touch the
temperature probe head to the part whose temperature you wish
to measure. Keep the probe touching the part under test until the
reading stabilize (about 30 seconds). Read the temperature in
the display. The digital reading will indicate the proper decimal
point and value.
Warning:
To avoid electric shock, be sure the thermocouple has been
removed before changing to any other measurement function.
5.12. Diode test
Warning:
To avoid electric shock, do not test any diode that has voltage
on it.
1. Set the function switch to "
.)))
/
" position.
2. Press the "SELECT" button until the " " symbol
appears in the display.
3. Insert the black test lead banana plug into the negative COM
jack and the red test lead banana plug into the positive V/
Ω
jack.
-71-