4.5. Resistance (
)
Note:
Always start with the highest measuring range.
1.) Choose with the rotary switch the corresponding measuring
range (Rx1 ~ R x1k).
2.) Connect the black test lead to the "COM" jack and the red test
lead to the "V/
/mA" socket.
3.) Before measuring short both test leads to check the zero
point. If the pointer does not move to 0, set the adjustment
knob (2) and set to zero.
4.) Connect the test leads of the instrument parallel to the
component to be measured and read the measured value
from the analog display.
-32-
