*
Disconnect test leads or probe from the measuring circuit
before switching modes or functions.
*
Do not conduct voltage measurements with the test leads
connected to the mA/A- and COM-terminal of the equipment.
*
The 10A-range is protected. To avoid damage or injury, use
the meter only in circuits limited by fuse or circuit breaker to
10A or 2000VA.
*
To avoid electric shock, disconnect power to the unit under
test and discharge all capacitors before taking any resistance
measurements.
*
Do not conduct current measurements with the leads
connected to the V-terminal of the equipment.
*
Check test leads and probes for faulty insulation or bare wires
before connection to the equipment.
*
To avoid electric shock, do not operate this product in wet or
damp conditions. Conduct measuring works only in dry
clothing and rubber shoes, i. e. on isolating mats.
*
Never touch the tips of the test leads or probe.
*
Comply with the warning labels and other info on the
equipment.
*
Do not operate the equipment near strong magnetic fields
(motors, transformers etc.).
*
Do not place the equipment on damp or wet surfaces.
*
Do not operate the meter before the cabinet has been closed
and screwed safely as terminal can carry voltage.
*
Do not turn the rotary function switch during voltage or current
measurement, otherwise the meter could be damaged.
*
Use caution when working with voltages above 35V DC or
25V AC. These Voltages pose shock hazard.
*
Fetch out the battery when the meter will not be used for long
period.
*
The measurement instrument is not to be to operated
unattended.
-22-
