PeakTech 2025 A, Руководство по эксплуатации, Страница: 53 / 64

53
6.4. Capacitance measurements
Warning !
To avoid electric shock, disconnect power to the unit under
test and discharge all capacitors before taking any
capacitance measurements. Remove the batteries and
unplug the line cords.
1. Set the function switch to the CAP function.
2.
Plug the black test lead into your meter’s COM-terminal
(-)
and the red test lead into your meter’s
V/

/Hz - terminal (+).
3. Connect the test leads to the capacitor to be tested. The
display will indicate the proper decimal point value.
6.5. Temperature measurements
Warning!
To avoid electric shock, disconnect both test probes from
any source of voltage before making a temperature
measurement.
1. If you wish to measure temperature set the function
switch to the °C-range
2. Insert the temperature-probe to the input sockets V/

/Hz
(+) and COM (-)
3. Touch the Temperature probe head to the part whose
temperature you wish to measure. Keep the probe
touching the part under test until the reading stabilizes
(about 30 seconds).
4. Read the temperature in the display. The digital reading
will indicate the proper decimal point and value.