4. Operation
4.1. Data Hold
If you need data hold when measuring, you can put on “HOLD”
button, it will hold the reading; if you put the button again, data hold
is not continue.
4.2. Maximum value measuring and Hold (MAX HOLD)
At the range of voltage,
you can put on “MAX” button, it will hold the
maximum value; if you put the button again, the maximum value will
not be held.
4.3. Function Transform (FUNC)
Put down the “FUNC” button when measuring the voltage. Meter
will be transformed between DC and AC range. Put FUNC button
when measuring the resistance, diode and continuity, meter will
transform among them.
4.4. Range Transform
The auto range is used when measuring the voltage and resistance.
Put down the “RAN” button if the manual range is needed. Each
time you put down, range will go upward; the minimum range is
transformed if “RAN” button is put down at the maximum range. If
the “RAN” button is put down more than two seconds, auto range is
used again.
-34-
